DESCRIPTION:
ENAMO GRIP is a tough, single-component anionic dispersion
of an aliphatic polyester urethane polymer in water. This unique
formulation offers UV control and weatherability far superior to standard
acrylic or blends that show weakness to acid rain and severe weather
changes and climate conditions.
The formulation has additional UV blockers and antiflash
rust inhibitors that strengthen the ability of the coating to face today's
industrial pollutants and city smog, as well as the increased UV
radiation. This coating was designed to overcoat SUPER
THERM and flex with the insulation coating without hairline cracking,
resists UV rays for stability, resists ponding water and maintains its
toughness, resists light foot traffic without harm to the coating surface.
This coating can be used alone as a finish coating over
facilities and equipment. Designed with automotive grade pigments to
insure longevity in weathering and toughness. NOTE: Being water-borne, the
surface film is not acceptable for anti-graffiti protection and removal as
is our solvent-based ENAMO GRIP. Only the
original ENAMO GRIP is designed for anti-graffiti protection.
The overall toughness, durability, and weather resistance of ENAMO GRIP
W/B polyurethane polymers make this a good choice for demanding product
applications for architectural/maintenance situations that require the
utmost in exterior/interior durability.
APPLICATION METHODS:
Surfaces must be clean and dry before application. Loose or flaking old
paints or corrosion must be removed from surfaces before applying. High-pressure water-blasting is as
effective as light sand-blasting in removing loose or flaking surfaces if you use 5000 psi. As a rule,
"coating is only as good as the surface it covers." Grease, oil, waxy substance,
dirt, etc. must be cleaned from surfaces. Old paints can remain if bonded solidly to
surfaces. ENAMO GRIP W/B can bond to metal, masonry, wood and other porous surface substrates.
ENAMO GRIP W/B can be applied best by brush, squeegee or foam applicator. Airless sprayers can
be used using a 18-thousandth tip for a smooth, even finish.
| FEATURES: |
|
|
| Lead-
and Chromate - Free - No Toxins |
| Shelf life: |
1 year |
|
| Vehicle type: |
Aqueous
polyurethane dispersion |
| Pigment type: |
Varies with color |
|
| Solids by volume: |
40.26%
By weight: 39.36% |
|
| Weight per
gallon: |
8.7
Ibs./gal.
average |
|
| Thickness: |
@150
sq.ft./gallon
Wet: 8 mils - Dry: 3 mils/coat
@200 sq.ft/gallon
Wet: 5 mils - Dry: 2 mils/coat
@100 sq.ft/gallon
Wet: 10 mils - Dry: 4 mils/coat |
| Impact
Resistance: |
Front:
160 psi/ |
| Water
Borne |
|
| Packaged unit: |
Shipped
as a 5-gallon kit. |
| Clean up: |
Soap/Water
wash. Rinse out. |
| Dry
Time: |
2
hours to touch/4 hours to recoat/10 days to full cure |
| COMES
READY TO MIX AND USE, NO NEED TO DILUTE OR THIN. |
|
|
|
|
|
| Enamo Grip W/B
M.S.D.S. |
| COVERAGE: METAL
SURFACE
150 sq.ft./gallon
WOOD, CONCRETE, POROUS
SURFACE
100 sq.ft./gallon each coat. Applied in 2 coats
FOAM/SUPERTHERM
COMBINATION
(finish coat)
200 sq.ft./gallon |
|